Syntax
Options
Usage
Output
The command displays a table of connected instruments:Instrument Types
The following instrument types are automatically detected:Power Supplies
- Rigol DP800 series (DP811, DP821, DP832)
- Keysight E36200/E36300 series
- Keithley 2200/2280 series
- EA PSB series
Oscilloscopes
- Rigol MSO5000 series
- PicoScope
Battery/Solar Simulators
- Keithley 2281S
- EA PSI/EL series
Electronic Loads
- Rigol DL3000 series
Data Acquisition
- LabJack T7 (ADC, DAC, GPIO)
- MCC USB-202 (ADC, DAC, GPIO)
- Phidget thermocouples
- Yocto watt meters
USB Hubs
- Acroname (4-port, 8-port)
- YKUSH
Debug Probes
- Segger J-Link
- CMSIS-DAP
- ST-Link
Serial Adapters
- FTDI USB-to-serial
Multiple Device Warning
The command warns if multiple instances of multi-hub devices are detected:- LabJack_T7
- Acroname_8Port
- Acroname_4Port
Address Formats
Different instruments use different address formats:
Long UART serial numbers are truncated to 10 characters for readability.
Examples
Troubleshooting
Notes
- Instruments must be connected via USB to the Lager Box
- Some instruments require specific drivers (udev rules)
- Run
lager updateto install latest udev rules - Use
lager netsto configure how instruments are used
See Also
- Nets — Configure logical names for your instruments
- Setting Up Instruments — Getting started guide for instrument setup

