Analog Nets

Nets assigned to the analog type can be inspected using an oscillscope. These nets are multiplexed with the other analog nets to 4 independent channels. A single channel can have up to 8 multiplexed nets connected to it for a total of 32 nets.

../../_images/mux_setup.png

Via the CLI and Python library, the scope trace of a net can be controlled, including (but not limited to):

  • How the trace is triggered, e.g. edge trigger on falling edges

  • Volts per division and Timer per division on screen

  • Waveform analysis, e.g. frequency, pulse width, peak to peak voltage

  • Bus decoding, e.g. SPI, I2C, UART, CAN