> ## Documentation Index > Fetch the complete documentation index at: https://docs.lagerdata.com/llms.txt > Use this file to discover all available pages before exploring further. # Version 0.62.0 > November 2, 2026 ## Upgrade Notes * **Update your boxes.** Most of this release runs on the box. Run `lager update --box ` after you upgrade the CLI. * **The first update downloads the whole box image.** The box image moves to a new Python base image, so every layer changes. Expect a download of about 1 GB per box. * **`lager nets add-all` names a scope's instrument net `oscilloscope1`.** It used to name the instrument net and its channel 1 net `scope1`. Nets that are already saved keep their names. A script that creates nets with `add-all` and then uses the instrument net by name must use the new name. * **`lager nets add` needs this CLI to accept a `UVC_Camera`.** Older CLIs refuse the new instrument name. `lager nets add-all` and the nets TUI accept it from older CLIs. ## Features * **`lager update --fork` and `lager install --fork` deploy box code from a GitHub fork.** Push a branch to your own public fork, then run `lager update --box --fork / --version `. * `--version` is required with `--fork`. * A fork deploy always builds on the box, because pre-built images exist only for release tags. * The box keeps `lagerdata/lager` as `origin`, and the fork's tags never replace release tags. * `lager hello` marks the box as a fork build. The next update without `--fork` returns the box to `lagerdata/lager`. * **Any USB video class camera can be a webcam net.** Cameras no longer need to be on a list. `lager instruments` lists an unknown camera as `UVC_Camera` with its product name. This includes a box's built-in camera. HDMI capture cards stay out. * **Bench multimeters are supported, starting with the Siglent SDM3065X.** The new `dmm` net role and `lager dmm NET [FUNCTION]` take one reading. Functions include DC and AC volts and current, 2- and 4-wire resistance, continuity, diode, frequency, period, capacitance and temperature. The options are `--range`, `--nplc` and `--sensor`. Python scripts use `Net.get(name, NetType.DMM).measure(...)`. * **Siglent SPD1168X supplies are supported.** The SPD1168X is a single-channel `power-supply` net for `lager supply`. `lager instruments` and `lager nets add-all` detect it over USB (`f4ec:1410`). Over LAN, create the net with `lager nets add-batch`, with `"instrument": "Siglent_SPD1168X"` and a `TCPIP::::INSTR` address. * **Rigol DS1000Z-series scopes (DS1054Z, DS1074Z, DS1104Z) work as scope nets.** The scope daemon reads the model from `*IDN?` and drives a DS1000Z over SCPI alone. `lager instruments` lists it (`1ab1:04ce`), and `lager scope` controls it. * **The box HTTP API covers more of the Python API.** Each new action has a `/status` capability or a response field, so a client can tell an older box apart. None of these actions has a `lager` command yet, and none has run on real instruments. * `enable` and `disable` on an e-load net switch its input (`eloadInputSwitch`). * `set_esr` on `/battery/command` sets or reads the series-resistance offset (`batteryEsr`). * `disable_ocp` and `disable_ovp` on `/supply/command` turn a supply's protection off (`supplyProtectionOff`). Setting a limit turns it back on. * `recover` on `/usb/command` returns the `ports` that it powers back on. * `disconnect` on `/wifi/command` takes the box's wlan interface down until a `connect` or a host reboot (`wifiDisconnect`). A box that you reach over that interface goes offline. * `read`, `write`, `notify` and `pair` on `/ble/command` work on one GATT characteristic (`bleGatt`). * `set_mode` and `custom_data` on `/blufi/command` set an ESP32's op mode and exchange bytes with it (`blufiDeviceMode`, `blufiCustomData`). ## Bug Fixes * **`lager python` shows why a box refused a run.** For an HTTP error, the CLI now prints the reason from the box. It used to print a generic hint, such as "Try again later" for a 503\. A box in collected run-record mode that cannot record a run now names the cause and the fix. The box also repairs the ownership of `/etc/lager/run_records` when it starts. * **Webcam nets keep their camera when `/dev/video*` numbers change.** A net opened the device number that was saved with it, so a different plug-in order could start the wrong camera. The net now finds its camera from its address each time. It reports a missing camera and does not open another one. * **Two identical cameras can both be webcam nets.** A camera with no serial, or with a serial that another camera shares, now has its USB port as its address, such as `usb-port:1-1.4`. Two of these cameras used to share an address, so `lager nets add` refused both. * **`/debug/connect` uses the `transport` that you ask for.** It takes `SWD` or `JTAG` and returns the transport that it used. It used to start J-Link and OpenOCD with SWD for every request. A net with its own OpenOCD config keeps the transport from that config. * **`lager nets add-all` no longer gives two nets the same name.** A scope's instrument net and its channel 1 net were both `scope1`. No new net now reuses a name that the box already holds under another role. ## Improvements * **A net with a safety ceiling keeps its protection on.** With `max_voltage` set, OVP stays on. With `max_current` set, OCP stays on. The hardware service enforces this, so it also covers a script that calls a driver's own `disable_*_protection` methods. ## Known Limitations * **The Siglent SPD1168X has no OVP or OCP.** `--ovp`, `--ocp`, `clear-ovp` and `clear-ocp` return an error. Its readings update about every 0.35 s, so a reading soon after a setpoint change shows the old value. ## Installation To install this version: ```bash theme={null} pip install lager-cli==0.62.0 ``` To upgrade from a previous version: ```bash theme={null} pip install --upgrade lager-cli==0.62.0 ``` Then update your boxes: ```bash theme={null} lager update --box ``` ## Resources [View Release on PyPI](https://pypi.org/project/lager-cli/0.62.0/) This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.